Strain Gauge (Bridge) Input Field Rangeable DIN Rail Mounted Isolated Transmitter

TERMINAL CONNECTIONS Power AC L1 or DC + Power AC L2 or DC - Input Signal + Input Signal - Excitation + Excitation - Output + Output - (Terminal Labeled) L1 L2 Input + Input - EXC.+ EXC.- Output + Output - Catalogue Manual

Features

	Allows Inputs of 0.5mV/V to 128mV/V
	Provides a Fully Isolated DC Output Proportional to Strain Gauge Input
	Selectable Response Time/Filter
	User-Settable Input and Output Ranges
	Connections and Ranging Readily Accessible From The Front
	Fully Labeled Jumper Positions for Easy Range Settings
	User Write-on Label
	Plug-in Terminal Blocks
	Standard DIN rail Mount With Easy Snap-on Snap-off
	Choice of Power Options
	Permanent Warranty
	UL, cUL Recognized

Description

The DM4051 provides an isolated voltage or current output proportional to a strain gauge (bridge) input.

The field rangeable product provides 10V excitation and has gold plated jumpers to select the following ranges and functions:
    
     Input Range and Output Range
     Elevated or Suppressed Offset
     Bandwidth Range
     Voltage or Current Output
     Normal or Reverse Acting Output

Connections are made via two 4-pin plug-in terminal blocks. These terminal blocks allow the product to be removed without unwiring the connections.

Typical Applications

Measurement of output from load cells, pressure transmitters, and strain gauge sensors. Eliminates ground loops and common mode signals. Single-unit replacement module provides all normal input and output ranges.

Mounting

The module mounts on a standard H-35 DIN rail. A spring latch holds it in place. The module is demounted by using a screw driver to release the latch. The latch release is accessible at the bottom of the module.

Specifications