|
TERMINAL CONNECTIONS
Power AC L1
Power AC L2
Input + (-10/10 V)
Input - (-10/10 V)
Input + ( 4/20 mA)
Input - ( 4/20 mA)
Output +
Output -
|
(Terminal Labeled)
L1
L2
Input ( + ) -10/10 V +
Input ( - ) -10/10 V -
Input ( + ) 4/20 mA +
Input ( - ) 4/20 mA -
Output( + )
Output( - )
|
|
|
|
|
Features
|
|
Choice of ± 10 VDC or 4/20 mADC Inputs
|
|
|
Provides a Bipolar Current Drive To A Current Controlled Valve
|
|
|
Unpluggable Terminal Blocks
|
|
|
Standard DIN rail Mount With Easy Snap-on Snap-off
|
|
|
Connections Readily Accessible From The Front
|
|
|
User Write-on Label
|
|
|
Permanent Warranty
|
Description
The DM3801 valve driver provides a bipolar current drive
to a current controlled valve.
The unit uses a pulse-width modulated square
wave output that switches at a high frequency. The duty
cycle of the output wave changes to create an average
DC current through the valve magnet winding.
The DM3801 valve driver is housed in an
aluminum DIN rail mountable case with a stainless steel
mounting plate and a plastic front panel.
Connections are made via two 4-pin plug-in
terminal blocks. These terminal blocks allow the product
to be removed without disconnecting the wires.
Typical
Applications
Hydraulic proportional valve driver.
Mounting
The module mounts on a standard H-35 DIN rail. A spring
latch holds it in place. The module is demounted by using
a screwdriver to release the latch. The latch release
is accessible at the bottom of the module.
Specifications
|
INPUT
4/20 mADC
(62 ohm internal shunt)
-10/10 VDC
(>500 Kilohms impedance)
Span Adjustment
±15% of span
Zero Adjustment
±15% of span
POWER
Wattage 2 W maximum
OPERATING TEMPERATURE
14 to 140°F
-10 to 60°C
TEMPERATURE STABILITY
±(0.02% of span)/°C
|
OUTPUT
-35/35 mADC to -100/100 mADC
ACCURACY
±0.1% of span
STEP RESPONSE TIME
Inductive load dependent
<10 mS (typical)
RIPPLE
(peak to peak)
0.1% of Span
INPUT TO OUTPUT LINEARITY
0.02% of span
COMMON MODE REJECTION
>100 dB, DC to 60 Hz
|
